In addition to being used
successfully in the wheelchair lift system, the same power unit can work in
many other applications, including material lifts, low-speed mixing purposes,
packaging machinery, conveyors for a high-value product and also as a control
for batch or continuous processes, such as baking or heat treating.
The power unit has many
handy features that can provide specific needs for companies and
businesses. The unit has a rigid,
double-decker chassis design that includes thick aluminum plates and durable
fasteners. The power unit also features
a brake that safely holds the motor without power, as well as a gear box in a
sealed unit. The power design also keeps the output from moving. The unit’s
chain drive is also rated for more than a 6,000-pound capacity.
The device’s power unit has
many electrical features. Controls allow the system to operate on low-current
24VDC power supply. With the PLC and expansion module wired to three
front-panel connectors, there are three switch circuits, including forward,
stop and reverse applications.
An emergency stop switch
circuit also passes through two of the connectors and disconnects the AC drive
from the motor, releasing the brakes to hold the motor. With UL listed electrical components and a
battery backup for at least five minutes of full-load operation, the power unit
can be utilized by a wide variety of industries.
This press release is presented without editing for
your information. GRIT does not recommend, approve or endorse the products
and/or services offered. You should use your own judgment and evaluate products
and services carefully before deciding to purchase.